Gunstock manufacturer semi inlet wood replacement stocks
GUN STOCK MAKERS INSTRUCTIONS FOR FITTING AND FINISHING

MACHINE INLET GUN STOCKS




  Gunstock makers explain basic procedures for installing a machine inlet gun stock which we will be breaking into four parts; fitting, shaping, sanding and finishing. Stock makers always do gun stock duplication in this order. Never attempt to shape or finish a gun stock before fitting is complete. If you have any additional question's, we have a technician available to assist you.


   If you need help finding the necessary tools and components commonly used buy gun stock makers, please contact us and if we don’t have it, we can get it. Please contact us for additional instructions from professional gunstock makers and note: NOT ALL MODELS REQUIRE THE SAME FITTING AND SHAPING TECHNIQUES.


   We are an authorized distributor of Lin-Speed Gunstock Oil. Available in 2 oz jars for $10.00. Gunstock makers such as Fajens and Bishops have used this product for gunstock finishing for many years.


   We are an authorized dealer for Graco adjustable butt pads and adjustable combs.

Also used by professional gun smiths.

 

   We are an authorized dealer for Dastra gunsmith tools for gunstock makers. Pricing varies depending on tool and sweep. Call for more info on gunsmithing tools and products.


Here are a few items you will need to finish gunstocks correctly.

    1. Lin-Speed Gunstock makers Oil for finishing excellent quality and

        easy to use. Available in 2 ounce jars $10.00 shipped free with

        purchase.  A real gun smiths favorite.

    2. Acraglass Gel bedding compound.

       Works great for filling voids and  to reinforce your stock. Be sure to

       use  the release agent included in your kit.   

    3. Locktite super glue to repair checking (small surface

        cracks which occur during drying process ) and can be used

        with saw dust to fill larger voids. Pack the hole with saw

        dust and soak with Locktite. A real plus for gunstock makers.

    4. In-letters black is used by gunstock makers for fitting which

        can be applied with a tiny touch up brush. Note use gold for dark

        woods. Apply thin coat to metal before attempting to assemble.

        A dark spot will show any extra wood that will need to be removed.

        Available $10.00

    5. Touch up pens and other dyes can be found at Brownell's

         and help to fade repairs and other imperfects.

    6. Formby’s gunstock re-finisher is a great way to remove most finishes

        from one part when matching to a new part. NOTE: it is

        always best to remove old finish to get to raw wood so the

        new part can be matched. Good for gunstock refinishing.

     7.Pilkington spirit stain used in stock making. Available $30.00



1. FITTING: When fitting a gun stock, regardless of the model, it is always best to start by closely comparing your original part to your new machine inlet part. Often small ridges and machining imperfections can be noted and cleaned using whatever appropriate scraping tool or file the application would require. A common practice by stockmakers and gunsmiths.


Note: a rotary grinding tool i.e. Foredom or Dremmel, while not mandatory, is an excellent advantage for any gunstock installer. Also, in addition to, a good assortment of small files (needle files) and standard size files, we recommend an assortment of stock makers chisels and scraping tools, which can be found in starter sets at most suppliers. Also, a good soft jaw bench vise to hold your project secure. Also, you will need inletting black/gold which can be purchased for $10.00.


  1. Always attempt to install your part onto the metal component to check the fit. (DO NOT FORCE).  If part does not install smoothly determine the cause visually.
  2.  If this is not possible, apply inletting black/gold to the metal parts that are suspect and reinstall the part. You will note a black or gold area appearing on the wood where contact is being made. Carefully clean off small amount of wood in the appropriate place (NOTE: DIMENSIONS for gunstock duplication ARE USUALLY WITHIN JUST A FEW THOUSANDTHS OF AN INCH). Be careful to remove small amounts at a time. Repeat this step until fit is achieved.
  3. Often times drilling holes and other light modifications will need to be made before installation can be achieved. Fitting of butt plate, butt pad also grip cap, end caps, adjustable combs and other options will need to be done during the fitting process. Please feel free to contact us for information about proper procedures for these modifications.

2. SHAPING: With butt plate and grip cap and other options installed and with all inletting complete you are ready to shape your gun stock. Gunstock makers will tell you this can generally be achieved with no more than a good set of files and a palm sander.



A.     With gunstock installed onto the gun note excess amount of wood where the marriage from metal-wood is achieved. This is referred to by gunstock makers as the wood being proud to the metal. Using a pencil you can trace against the metal to achieve a line of reference. This will be helpful because shaping of the gunstock should be done with gunstock removed from the metal components. Use the appropriate files for shaping the areas to your preferred contour. Note: A very small amount of extra wood should be left for sanding.

B.     Now using a palm sander using 60 to 80 grit paper finish the shaping process and remove any file marks left on the stock, be careful not to over sand around inletted areas.

   

3. SANDING: Sanding is a simple process of removing any imperfections or machining marks not yet removed in the prior steps. Start off with 120 grit sandpaper and a palm sander; I prefer the triangle shape because it is easier to get into small areas like flutes and around the grip. After all machine marks and imperfections have been removed switch to a 220 grit sandpaper and repeat. Finally, using a 400 grit sandpaper brings the surface to a clean consistent appearance throughout. 400 grit, 1500 grit, 800 grit sandpaper available for $1.00 a sheet.

 

 4. FINISHING: gunstock makers will tell you that finishing a gunstock can be achieved with a number of different methods . In the  interest of keeping it simple, for less experienced installers, we will cover only the more simple techniques. We feel that a hand rubbed oil finish is the easiest method for an inexperienced installer to use and will easily produce a beautiful deluxe finish for any grade/type of gunstock. 


  1. Apply a generous amount of Lin-Speed Oil to the gunstock part by first pouring the oil into the palm of your hand and rubbing it directly into the grain of the wood for about  2 minutes .  Remove all extra oil from the part. NOTE: EXCESS OIL WILL CAUSE GUMMY FEEL. Be sure to take care with the rags which have oil on them they may spontaneously com-bust and cause fire.
  2. After giving gunstock time to dry, which will vary  from temperature and humidity . It is time to lightly sand with 600 grit paper. Do not over sand you don’t want to remove all of the finish. Now sand with 1200 grit for that final luster. If finish is accidentally removed completely; repeat step A. Gunstock makers use a buffing wheel and compound for stock finishing, but are not mandatory to achieve a quality finish.
  3. Lin-speed oil is a good way to finish in checkered areas without gumming up in the checkering. I use a tooth brush to apply. Remove all excess. A favorite of stock makers.
      
 
CHECK OUT OUR NEW SITE AT MACONGUNSTOCKS.COM
 
Payment Processing

Mailing Address: 34535 Lickingteller Ave., Warsaw, MO 65355

Phone: 660-438-4699 or 660-438-4697

Email: info@macongunstocks.com

sales@macongunstocks.com


Copyright © 2010-2011
 
  Site Map